The court said pending the completion of the police probe into the case and the final hearing in the matter before it, the BMC must pay the compensation amount of Rs 10 lakh to the victim’s family through a five-year fixed deposit in a bank. The family has demanded more than Rs 1 crore as compensation. And hence the authorities could not escape their liability of compensating the family of Maru for the incident observed the bench.However, the ward boy then asked Maru to carry an oxygen cylinder meant for his relative into the MRI scan room. According to the plea, this ward boy had assured Maru that the MRI machine inside the room would be switched off and, therefore, there was no risk in carrying the daily necessities injection mold suppliers cylinder inside.The division bench of Justice Akil Kureshi and Justice S.J. The bench also held that all material evidence on record had led the court to come to ‘strongly conclude’ that “but for the negligence of the hospital authorities, the unfortunate incident wouldn't have occurred”. There, as per protocol, Maru and his relative were directed to rid themselves of all metallic objects considering the presence of strong magnetic waves of the MRI machine. The court will continue hearing the petition.

The bench also observed that the tragic accident was caused due to the negligence of the hospital authorities. Kathawalla passed this order while hearing a petition filed by Maru’s family seeking compensation.A ward boy and a female attendant had accompanied Maru and his relative up to the ‘MRI lobby’ of the hospital.

Rajesh Maru Mumbai: In an interim order, the Bombay high court on Tuesday directed the Brihanmumbai Municipal Corporation (BMC) to give Rs 10 lakh as compensation to the family of Rajesh Maru, who died after being getting sucked into an MRI machine at the civic-run BYL Nair Hospital in 2018.According to the family, on January 28, 2018, Maru had gone to Nair to visit a relative admitted there.The bench noted that the accident was caused due to negligence of the hospital authorities. The same evening, the relative was taken for an MRI scan on the hospital premises.The hospital and the BMC, however, opposed the plea filed by Maru’s family on the grounds that the FIR registered in the case and statements of witnesses, among other things, did not establish the reason why Maru had been sucked into the machine

“Kolkata should play its role in making this campaign 100 per cent success,” he said. That should be our resolve on the eve of World Environment Day on June 5,” WBPCB chairman Kalyan Rudra told reporters. But the government can empower urban local authorities to this effect. Single-use plastics are used only once before they are thrown away or recycled.Rudra said India has been chosen by the United Nations Environment Programme as a host for this year’s World Environment Day celebrations tomorrow, for taking constructive action against plastic pollution. Peta displays a ‘dead cow’ consume plastic waste,on the World Environment Day in front of Victoria Memorial on Monday.

He said the WBPCB will organise a number of functions on World Environment Day on Tuesday projecting this objective.Single-use plastics are used only once before they are thrown away or recycled. (Photo: Abhijit Mukherjee) Kolkata: The West Bengal Pollution Control Board (WBPCB) on Monday gave a call for shunning single-use plastics which triggers natural disasters such as flood and pollute the environment. Asked if imposing fine can improve the situation, Mr Rudra said, “The WBPCB can’t impose fines on its own.“We can’t go without plastics but we must stop dumping single-use plastic.

These items include plastic bags, straws, coffee stirrers, soda and water bottles and food packaging materials. We must refuse when vendors give us items in plastic packets which can’t be used twice. He was talking to reporters on the sidelines of a seminar ‘Beat Plastic Pollution’ organised by the Bengal National Chamber of Commerce & Industry and the National Small Industries Corporation Limited. “To stop single-use plastics, we need active participation of every China pallet mold Manufacturers citizen as this task cannot be solely accomplished by the government and the WBPCB,” Mr Rudra said.”

Scientists from the University of Plymouth in the UK analysed 200 used plastic toys which they found in homes, nurseries and charity shops. (Photo: Pixabay) Many second-hand toys could pose a risk to children&process of molding Suppliers39;s health as the plastic may not meet the most up to date international safety guidelines, a study has found.Scientists from the University of Plymouth in the UK analysed 200 used plastic toys which they found in homes, nurseries and charity shops.These included cars, trains, construction products, figures and puzzles, with all of them being of a size that could be chewed by young children.

"Second hand toys are an attractive option to families because they can be inherited directly from friends or relatives # or obtained cheaply and readily from charity stores, flea markets and the internet," said Andrew Turner, from the University of Plymouth. The plastic may not meet the most up to date international safety guidelines.

For the study published in the journal Environmental Science and Technology, the researchers used x-ray fluorescence (XRF) spectrometry to analyse the presence of elements within individual toys.They discovered high concentrations of hazardous elements including antimony, barium, bromine, cadmium, chromium, lead and selenium - which are chronically toxic to children at low levels over an extended period of time - in many building blocks, figures and items of jewellery that were typically either yellow, red or black.Further tests showed that under simulated stomach conditions (involving extraction in dilute hydrochloric acid) several toys released quantities of bromine, cadmium or lead that exceeded limits set by the European Council's Toy Safety Directive, with the release of cadmium exceeding its limit value by an order of magnitude in some cases.

The Bombay high court on Friday granted an interim stay till June 30 on implementation of the government of Maharashtra’s order banning the sale of liquor in plastic bottles across the state. Barrel injection mold Factory The Bombay high court on Friday granted an interim stay till June 30 on implementation of the government of Maharashtra’s order banning the sale of liquor in plastic bottles across the state.

Waghela and Justice M.Claiming that selling liquor in bottles made of polyethylene terephthalate is a health hazard, the government had issued a Government Resolution (GR) banning the sale of alcohol in plastic bottles. The court posted the petitions for hearing on June 14.H. Moreover, if it had to impose a ban, the government could have only done so through legislation and not by merely issuing a ‘resolution’.

However, the court stayed the ban for a temporary period. As per the GR, the ban was supposed to come into effect from Friday. The petitions claimed that the government could not impose such a ban, as sale of liquor in a particular make of bottles is governed under the FSSA Act.S.However, soon after the order Distillers Association of Maharashtra and the All India Plastic Manufacturers Association among others filed petitions in the high court, challenging the ban. Sonak on Friday granted interim stay on implementation of the ban till June 30.A division bench of Chief Justice D